OG - DW - K Circular saw blades

HM circular saw blades to cut wood, its derivatives and plastic materials
  • soft - hard - exotic wood
  • chipboards
  • board panels coated with melamine
  • MDF and laminated panels
  • PVC panels or plates, composites, ABSApplicazione Silent

To be used on squaring machines, with or without scoring:
  • Speed of use 60-80 m / s
  • High feed cutting process according to the section and quality of the material to be cut
  • Silencing slots with application of sound-absorbing material
  • High stress resistance
 
We produce all sizes, number of teeth and thickness
Diameter: from 30 mm up to 2200 mm
Thickness: from 1 mm up to 15 mm
  
 
The following table shows just a few of the most commonly used diameters, number of teeth and thickness
Type OG
Diameter ST SC Teeth
300 4,4 3,0 48-54-60-72
350 4,4 3,0 42-54-60-72
380 4,4 3,0 48-60-72
400 4,4 3,0 48-60-72
420 4,4 3,2 54-60-72
430 4,4 3,2 54-60-72
450 4,4 3,2 48-54-60-72
470 4,4 3,2 60-72
480 4,4 3,2 60-72
500 4,4 3,2 48-60-72
550 5,2 3,5 48-60-72
565 5,2 3,5 48-60-72
570 5,2 3,5 48-64-72
600 5,2 3,5 48-60
(ST = cutting thickness, SC = body blade thickness)
Central bore and pin-holes available for all types of machines.
 
Engravers to combine to the OG blade type
         
    Tipo DW (incisore regolabile)
Type DW (Adjustable scoring)
Diameter ST SC Teeth
80 3,6 / 2,8 2,2 10 + 10
100 3,6 / 2,8 2,2 12 + 12
110 3,6 / 2,8 2,2 12 + 12
120 3,6 / 2,8 2,2 12 + 12
125 3,6 / 2,8 2,2 12 + 12
180 5,6 / 4,4 3,2 20 + 20
200 5,2 / 4,3 3,2 30 + 30
250 5,2 / 4,3 3,2 30 + 30
(ST = cutting thickness, SC = body blade thickness)
Central bore and pin-holes available for all types of machines.

 Forma piano Tipo K (incisore conico)
Type K (Conical scoring)
Diameter ST SC Teeth
80 4,4 / 3,2 2,2 12
100 4,4 / 3,2 2,2 18 - 20
115 4,4 / 3,2 2,2 20 - 24
120 4,4 / 3,2 2,2 24
125 5,6 / 4,4 3,2 24
150 5,6 / 4,4 3,2 24 - 36
160 5,6 / 4,4 3,2 36
180 5,6 / 4,4 3,2 36
200 5,6 / 4,4 3,2 36
215 5,6 / 4,4 3,2 42
280 5,6 / 4,4 3,2 48
300 5,9 / 4,4 3,2 48 - 72
(ST = cutting thickness, SC = body blade thickness)
Central bore and pin-holes available for all types of machines.
Execution of different sharpening geometries, use of various teeth quality and coatings.
 
Our technical office remains at your disposal for every application needs.