Thin and extra thin HM circular saw blades for the cutting of aluminum and its alloys, copper, bronze, lead, brass, magnesium, tin, titanium
- thin section profiles
- medium and small sections of solids
To be used on automatic machines:
- Speed of use 60-90 m / s
- High feed cutting process
- Remarkable reduction of waste material
- High resistance to mechanical stress despite the low thickness
- Maximum tool life
- Execution of silencing slots with application of sound-absorbing material
Body blades steel
Steel used for the construction of the body blades is hot or cold rolled.
There are two main categories:
- 80CrV2: for medium / high applications with high stress
- 75Cr1: for standard applications
Teeth
The choice of high quality carbide, to be used for cutting different materials, is directed towards various types of quality of micro / fine / medium grain inserts, to ensure greater durability of the circular blade, greater resistance to shocks and limited wear of the tooth.
The choice of the right number of teeth varies according to the type of automatic cutting.
It depends on various factors, such as type and state of the material and its thickness.
The mainly used cutting geometry is the trapezoidal-flat, in groups of four or five teeth, with nail or chip breaker groove.
Positive or negative cutting angles are designed to ensure optimal penetration into the material to be cut, with smaller radial and tangential angles, designed to reduce wear of the tool.
We produce all sizes, number of teeth and thickness.
Diameter: from 100 mm up to 2200 mm - Thickness: from 1 mm up to 15 mm
The following table shows just a few examples of our production,
we manufacture customized blades on request:
| Type TL |
| Diameter |
ST |
SC |
Teeth |
| 200 |
2,6 |
1,8 |
48 - 60 - 90 |
| 225 |
2,6 |
1,8 |
48 - 60 - 90 |
| 250 |
2,6 |
1,8 |
48 - 60 - 90 -120 |
| 275 |
2,6 |
1,8 |
48 - 60 - 90 -120 |
| 285 |
2,6 |
1,8 |
48 - 60 - 90 -120 |
| 300 |
2,6 |
1,8 |
48 - 60 - 90 -120 |
| 315 |
2,6 |
1,8 |
48 - 60 - 90 -120 |
| 330 |
2,6 |
1,8 |
48 - 60 - 90 -120 |
| 350 |
2,6 |
1,8 |
48 - 60 - 90 -120 |
| 400 |
2,6 |
1,8 |
48 - 60 - 90 -120 |
(ST = cutting thickness, SC = body blade thickness)
Central bore and pin-holes available for all types of machines.
| Type OSP |
| Diameter |
ST |
SC |
Teeth |
| 180 |
1,5 |
1,2 |
60 |
| 200 |
1,5 |
1,2 |
60 |
| 225 |
1,5 |
1,2 |
60 |
| 250 |
1,8 |
1,4 |
60 - 90 |
| 275 |
1,8 |
1,4 |
60 - 90 |
| 300 |
2,0 |
1,5 |
60 - 90 |
| 315 |
2,0 |
1,5 |
60 - 90 |
| 330 |
2,0 |
1,5 |
60 - 90 |
| 350 |
2,2 |
1,6 |
60 - 90 |
| 400 |
2,2 |
1,6 |
60 - 90 |
(ST = cutting thickness, SC = body blade thickness)
Central bore and pin-holes available for all types of machines.
Our technical office is at your full disposal for any request
