HM circular saw blades for the cutting non-alloy, alloy and strongly-alloyed steel and stainless steel, up to 380/400 HB hardness
- tubes and profiles with medium - fine section
- tubes and profiles from medium to high section
- solid sections (rods, bars, billets, plates, sheets, etc.)
- TIN, PVC, TIALN coatings available
- to be used on automatic sawing machines
- extreme resistance to stress
Table about speed and feed values, for circular saws with tungsten carbide teeth to cut steel
Type of material |
Resistance
N / mm2 |
Cutting speed
m / min. |
Non-alloy steels |
≤ 600 |
120 - 150 |
Lightly alloyed steels |
≤ 700 |
110 - 120 |
Alloy steels |
≤ 900 |
90 - 110 |
highly alloyed steels |
≤ 1200 |
75 - 90 |
We produce all sizes, number of teeth and thickness.
Diameter: from 30 mm up to 2200 mm
Thickness: from 1 mm up to 15 mm
The following table shows just a few of the most commonly used diameters, number of teeth and thickness
Type TM |
Diameter |
ST |
SC |
Teeth |
200 |
3,5 |
2,6 |
50-60 |
250 |
3,5 |
2,6 |
60-72 |
300 |
3,5 |
2,6 |
60-72-90 |
350 |
4,0 |
3,2 |
60-72-90 |
400 |
4,0 |
3,2 |
60-72-80-100 |
420 |
4,0 |
3,2 |
60-80-100-120 |
450 |
4,5 |
3,6 |
60-80-100-120 |
500 |
5,0 |
4,0 |
60-80-100-120 |
(ST = cutting thickness, SC = body blade thickness)
For bigger sizes see BIG DIAMETER SAW BLADES - TM
Central bore and pin-holes available for all types of machines.
Execution of different sharpening geometries, use of various teeth quality and coatings.
Our technical office remains at your disposal for every application needs.